1. Internetworking
1.1. Internetworking Basic
1.2. Internetworking Models
1.3. The OSI Reference Model
1.4. Ethernet Networking
1.5. Ethernet Cabling
1.6. Data Encapsulation
1.7. The Cisco Three-Layer Hierarchical Model
2. Introduction to TCP/IP
2.1. TCP/IP and the DoD
Model
2.2. IP Addressing
2.3. Broadcast Address
3. Subnetting, Variable Length
Subnet Masks (VLSMs), and Troubleshooting TCP/IP
3.1. Subnetting Basics
3.2. Variable Length Subnet Masks (VLSMs)
3.3. Summarization
3.4. Troubleshooting IP Addressing
4. Cisco’s Internetworking Operating System (IOS) and
Security Device Manager (SDM)
4.1. The IOS User Interface
4.2. Command-Line Interface
4.3. Router and Switch Administrative Configurations
4.4. Cisco’s Security Device Manager (SDM)
5. Managing a Cisco Internetwork
5.1. The Internal Components of a Cisco Router
5.2. The Router Boot Sequence
5.3. Managing Configuration Register
5.4. Backing up and Restoring the
Cisco IOS
5.5. Backing Up and Restoring the Cisco Configuration
5.6. Using Cisco Discovery Protocols (CDP)
5.7. Using Telnet
5.8. Resolving Hostnames
5.9. Checking Network Connectivity and Troubleshooting
6. IP Routing
6.1. Routing Basics
6.2. The IP Routing Process
6.3. Configuring IP Routing in Our Network
6.4. Dynamic Routing
6.5. Distance-Vector Routing Protocols
6.6. Routing Information Protocol (RIP)
6.7. Inferior Gateway Routing Protocol (IGRP)
6.8. Verifying your Configuration
7. Enhanced IGRP (EIGRP) and Open Shortest Path First
(OSPF)
7.1. EIGRP Features and Operation
7.2. Using EIGRP to Support Large Networks
7.3. Configuring EIGRP
7.4. Load Balancing with EIGRP
7.5. Verifying EIGRP
7.6. Open Shortest Path First (OSPF) Basics
7.7. Configuring OSPF
7.8. Verifying OSPF Configuration
7.10. OSPF and Loopback Interfaces
7.11. Troubleshooting OSPF
7.12. Configuring EIGRP and OSPF Summary Routes
8. Layer 2 Switching and Spanning Tree Protocol (STP)
8.1. Before Layer 2 Switching
8.2. Switching Services
8.3. Spanning Tree Protocol (STP)
8.4. Configuring Catalyst Switches
8.5. Cisco Network Assistant
9. Virtual LANs (VLANs)
9.1. VLAN Basics
9.2. VLAN Memberships
9.3. Identifying VLANs
9.4. VLAN Trunking Protocol (VTP)
9.5. Routing between VLANs
9.6. Configuring VLANs
9.7. Configuring VTP
9.8. Telephony: Configuring Voice VLANs
9.9. Using the CAN to Configure VLANs
and Inter-VLAN Routing
10. Security
10.1. Perimeter, Firewall and Internal Routers
10.2. Recognizing Security Threats
10.3. Mitigating Security Threats
10.4. Introduction to Access Lists
10.5. Standard Access Lists
10.6. Extended Access Lists
10.7. Advanced Access Lists
10.8. Monitoring Access Lists
10.9. Configuring Access Lists Using SDM
11. Network Address Translation (NAT)
11.1. When Do We Use NAT?
11.2. Types of Network Address Translation
11.3. NAT Names
11.4. How NAT Works
11.5. Testing and Troubleshooting NAT
11.6. Configuring NAT on Our Internetwork
11.7. Configuring NAT Using SDM
12. Cisco’s Wireless Technologies
12.1. Introduction to Wireless Technology
12.2. Cisco’s Unified Wireless Solution
12.3. Configuring Our Wireless Internetwork
13. Internet Protocol Version 6 (IPv6)
13.1. Why Do We Need IPv6
13.2. The Benefits and Uses of IPv6
13.3. IPv6 Addressing and Expressions
13.4. How IPv6 Works in an Internetwork
13.5. IPv6 Routing Protocols
13.6. Migrating to IPv6
13.7. Configuring IPv6 on Our Internetwork
14. Wide Area Networks
14.1. Introduction to Wide Area Networks
14.2. Cable and DSL
14.3. Cabling the Serial Wide Area Network
14.4. High-Level Data-Link Control (HDLC) Protocol
14.5. Point-to-Point Protocol (PPP)
14.6. Frame Relay
14.7. Using SDM for WAN Connections
14.8. Virtual Private Network